6.0 Power Stroke Diesel


DeLong Ford Inc.
FORD 6.0
PERFORMANCE ENHANCEMENT
UPGRADE PROGRAMS


STAGE 1 - EGR UPGRADE

    $754.00 Labor    $1145.28 Parts   Total-- $1929.28

•Intake gasket set
•Turbo mounting hardware kit
•Green oring
•Install tuner "SCT X4" Included in price
   If not needed subtract $455.81






STAGE 2 - EGR UPGRADE & TURBO CLEANING
    $822.00 Labor    $1177.61 Parts   Total-- $2059.61

•Intake gasket set
•Turbo mounting hardware kit
•Green oring
•Install tuner "SCT X4" Included in price
   If not needed subtract $455.81

•Turbo split
•Clean ICP Sensor
•Clean intake air temp sensor
•Updated drain tube



The failed EGR cooler will send coolant through your turbo. Mixing heat, soot and coolant in the exhausts side of a variable vane turbo will cause the turbo vanes to stick resulting in an over or under boost condition resulting in a MIL. We recommend to split it and clean it.



STAGE 3 - EGR UPGRADE, TURBO CLEANING, STC FITTING
$980.00 Labor   $1469.78 Parts   Total! -- $2449.78


•Intake gasket set
•Turbo mounting hardware kit
•Green oring
•Install tuner "SCT X4" Included in price
   If not needed subtract $455.81

•Turbo split
•Clean ICP Sensor
•Clean intake air temp sensor
•Updated drain tube
•STC fitting


This STC fitting kit is a recommended update for all Power stroke 6.0 from 2004-2007. The old style fitting was prone to leaking causing hard start, below normal oil pressures and stalling when engine reaches normal operating temperature. Highly recommended updating this part when you're replacing your EGR cooler, installing a EGR delete or oil cooler.



STAGE 4 - EGR UPGRADE, TURBO CLEANING & OIL COOLER
$1176.00 Labor   $1941.50 Parts  Total! -- $3117.50


•Intake gasket set
•Turbo mounting hardware kit
•Green oring
•Install tuner "SCT X4" Included in price
   If notneeded subtract $455.81

•Turbo split
•Clean ICP Sensor
•Clean intake air temp sensor
•IPR screen replacement
•Updated drain tube
•STC fitting
•New OEM FORD oil cooler
*BG Coolant Flush Recommended Price $34.50


When the oil cooler blows it mixes engine oil with engine coolant in this process plugs your radiator, and contaminates your engine coolant. In the process of the performance upgrade it is recommended to install a new oil cooler.


STAGE 5 - EGR UPGRADE, TURBO CLEANING, OIL COOLER & HEAD STUDS

$2352.00 Labor    $3464.29 Parts    Total--$5816.29

Intake gasket set
Turbo mounting hardware kit
Green oring
Install tuner "SCT X4"
   If not needed subtract $455.81
Turbo split
Clean ICP Sensor
Clean intake air temp sensor
IPR screen replacement
Updated drain tube
Install new dummy plugs
STC fitting
New oil cooler
BG Coolant Flush
ARP Head studs
Head gaskets
Resurface both heads
Rocker carrier gaskets
Exhaust manifold gaskets
New injector orings
Thermostat and gaskets


Once good gaskets and ARP Head Studs are installed, the 6.0 Power strokes are extremely reliable.  Take your time and do the job right with quality parts.  We have several 6.0 Power stroke engines in shop vehicles that have over 300,000 miles on them.  With proper maintenance and addressing some of the weak points they can be made to be great reliable engines.  DeLong Ford only installs genuine Ford OEM parts in your Powerstroke Diesel engines!!

***In some circumstances other parts are needed to ensure the quality of the work performed by DeLong Ford. In these cases our experienced service department personnel will contact the customer and verify approval before additional work is preformed.***





 


6.0 L Injector Change Options

                The chart below shows how costly your bill could be if you were to replace each

injector as they failed.

1 injector             $264.29                 Labor     $392.00               Total $558.29

2 Injectors           $528.58                 Labor     $784.00               Total $1116.58

3 Injectors           $792.87                Labor     $1176.00              Total $1674.87

4 Injectors           $1057.16              Labor     $1568.00              Total $2233.16

5 Injectors           $1321.45              Labor     $1960.00              Total $2791.45

6 Injectors           $1585.74              Labor     $2352.00              Total $3349.74

7 Injectors           $1850.03              Labor     $2744.00              Total $3908.03

8 Injectors           $2114.32              Labor     $3136.00              Total $4466.32

The chart below shows how much you would save if you were to replace 4 injectors, (one side of the engine) 4 injectors, or (both sides of the engine) 8 injectors.

4 injectors one side of the engine                    $1498.16  Total

8 injectors both sides of the engine                 $2898.32 Total

 

Example: If one injector would fail on left side we recommend replacing all 4 injectors on that side, due to the amount of time it takes to get to the injectors.

                                NOTE: Motorcraft injectors have a 2 year/unlimited full warranty.

AdChoices
;